1st Time Setup Instructions

1. Register 

Register your controller and store information for your warranty, receive offers and updates for your controller and stay up to date with all the latest SCUF information.

REGISTER YOUR VANTAGE HERE

2. PC App Download (Beta 1.0.2)

The new SCUF Vantage Customization App allows you to quickly setup and save profiles, customize paddles and SAX buttons mappings, thumbstick deadzones, trigger sensitivity and vibration settings. Currently compatible with computers running Windows 7 and 10. Video Guide

You will need to install the USB PC Driver for the SCUF Vantage prior to connecting your Vantage controller to the PC Customization App (Beta 1.0.2).

By clicking the link below, you confirm that you have read and accept the End User License Agreement.

Download PC Customization App (Beta 1.0.2)

*Please note if you previously used Beta 1.0.1 that you will need to delete your profiles from the application before using 1.0.2.

3. Connect your controller

Setup your controller on PlayStation 4®

Video Guide

Looking to connect your controller on PC? Click Here

Wired Mode (USB)

1. If you own a Wireless & Wired controller, switch the Wireless/Wired Switch to the left (USB).
2. Connect the Micro-USB end of the cable to the Micro-USB port on the back of your controller.
3. Connect the other end of the cable to one of the USB ports on your PS4™ console.
4. Press the PS Button on your SCUF Vantage 2.

Wireless Mode (Bluetooth)

This operation is performed only once per console, when you are using the SCUF Vantage 2 controller for the first time on a console.

1. Turn on your PS4™ system by pressing the power button on the console.
2. Slide the Wireless/Wired switch on your SCUF Vantage 2 to the right (Bluetooth™).
3. Using another controller already connected to your PS4™, select: Settings > Devices > Bluetooth™ Devices from the PS4™ System Menu.
4. Press the PS Button on your SCUF Vantage 2 to activate it. 
5. Press and hold the Share Button and the PS Button simultaneously until the Light Bar begins to flash.
6. Place the controller close to the PS4™ System and wait for "SCUF Controller" to appear in the device list.
7. Using the connected controller, select "SCUF Controller" from the PS4™ System List and press the "X" button and when prompted, select "Yes."
8. The LED on the SCUF Vantage 2 will Illuminate for 3 seconds then turn off, indicating successful pairing.

4. Connect your headset

Video Guide

The SCUF Vantage 2 is compatible with the following types of headsets:

Type 1: Wired headsets equipped with a 3.5mm jack connected to the controller.
Type 2: Wired headsets equipped with a USB cable connected to a USB Port on the PS4™ Console.
Type 3: Wired and Wireless headsets connected to an external audio mixer amp or base. The audio mixer amp or base is connected to a USB port on the console.

Please refer to the chart below to figure out the right Vantage 2 model for you based on your setup.

Headsets of type 2 and 3 connect directly to the console and are fully compatible with the Vantage 2. If while using those headsets, no sound is coming through the headset, please do the following troubleshooting:

Step 1: Turn off the audio amp or headset base and turn it back on.

Step 2: You will be prompted by the PS4™ to select a profile.

Step 3: Select the profile you’re currently using and audio should come through the headset again.

Headsets of type 1 must have a 3.5mm audio plug and need to be connected into the SCUF Vantage 2 3.5mm audio jack port directly. Please note that the Vantage’s Audio Touch Bar functionality is compatible in Wired mode (USB) only as stated in the user instructions documents included with your Vantage 2 controller. If you own a Vantage 2 Wireless and Wired model, please ensure that the Wired/Wireless switch is toggled to the left (Wired mode).

To setup your controller on PC, visit this page.