TRIGGER CONTROL SYSTEM
Reduces latency, allows you to optimize the triggers to eliminate unnecessary movement and accommodates different hand sizes. The Trigger Control System consists of three modules: the Adjustable Hair Triggers, the Quick Shift Trigger Stops, and the Interchangeable Trigger Covers.
ADJUSTABLE HAIR TRIGGERS
You may want to adjust and fine-tune your trigger tension to reduce latency in trigger pull for faster response time. We recommend adjusting the Hair Triggers in-game by tightening until the in-game action is initiated, then loosening off slightly to your playing preference. Video Guide
To use your Hair Trigger feature:
– Lift the lip of the Trigger Cover straight up to separate it from the trigger body.
– Insert the SCUF Key (0.9mm) into the adjustable screw.
– Turn the SCUF Key clockwise to tighten the Hair Trigger. Then turn the SCUF Key counterclockwise to loosen the Hair Trigger.
To return to standard Hair Trigger operation:
– Insert the SCUF Key (0.9mm) into the adjustable screw and turn counterclockwise until the screw is flush with the top of the trigger body.
– Replace the Trigger Cover by pushing the trigger down and snapping the top part of the cover on first, then push the bottom of the Trigger Cover down to snap it in place. You will hear a “click” when the Trigger Cover is secured.
QUICK SHIFT TRIGGER STOPS
Trigger Stops are designed to reduce trigger latency by eliminating the travel required past the activation point of the trigger. Use your fingers to adjust the Trigger Stop position on the trigger. This feature may not be compatible with all games, and is most efficient in shooter games. Video Guide
– “ON” position: the travel distance when releasing the trigger will be reduced.
– “OFF” position: the trigger will have a standard travel distance.
Trigger Covers are fully removable and easily clip onto the trigger body. They are designed to let you access the Hair Trigger for fine-tuning and to improve your trigger accuracy and hand comfort. The Long Trigger Covers extend the natural parameters of the controller to suit larger hand sizes and have a rubberized grip for added control. Video Guide
TRIGGER COVERS – SHORT OR LONG
To remove the Trigger Covers:
– Lift the lip of the Trigger Cover straight up to separate it from the trigger body.
To replace Trigger Covers:
– Replace the Trigger Cover by pushing the trigger down and snapping the top part of the cover on first, then push the bottom of the Trigger Cover down to snap it in place. You will hear a “click” when the Trigger Cover is secured.