The SCUF Vantage 2 is compatible with the following types of headsets:
Type 1: Wired headsets equipped with a 3.5mm jack connected to the controller.
Type 2: Wired headsets equipped with a USB cable connected to a USB Port on the PS4™ Console.
Type 3: Wired and Wireless headsets connected to an external audio mixer amp or base. The audio mixer amp or base is connected to a USB port on the console.
Please refer to the chart below to figure out the right Vantage 2 model for you based on your setup.
|
Models |
Connectivity |
Standalone wired 3.5mm headset |
Audio Mixer with Wired headset |
Standalone wired USB Headset |
Wireless headsets |
|
Vantage 2 Wired |
Wired (USB) |
Yes |
Yes |
Yes |
Yes |
|
Vantage 2 Wireless & Wired |
Wired mode (USB) |
Yes |
Yes |
Yes |
Yes |
|
Wireless mode (BT) |
No |
Yes |
Yes |
Yes |
|
Headsets of type 2 and 3 connect directly to the console and are fully compatible with the Vantage 2. If while using those headsets, no sound is coming through the headset, please do the following troubleshooting:
- Turn off the audio amp or headset base and turn it back on.
- You will be prompted by the PS4™ to select a profile.
- Select the profile you’re currently using and audio should come through the headset again.
Headsets of type 1 must have a 3.5mm audio plug and need to be connected into the SCUF Vantage 2 3.5mm audio jack port directly. Please note that the Vantage’s Audio Touch Bar functionality is compatible in Wired mode (USB) only as stated in the user instructions documents included with your Vantage 2 controller. If you own a Vantage 2 Wireless and Wired model, please ensure that the Wired/Wireless switch is toggled to the left (Wired mode).