Removing the Vibration Modules will significantly reduce the weight of the controller and turn off vibration in the handles. These modules should be removed based on player preference.
To remove the Vibration Modules:
Step 1: Remove the faceplate by lifting it from the controller chassis using the two finger notches on each side of the handles.
Step 2: Remove both Vibration Modules from the controller by lifting the finger notch on top of each of the modules.
To re-insert Vibration Modules:
Step 1: Remove the faceplate by lifting it from the controller chassis using the two finger notches on each side of the handles.
Step 2: Place the Vibration Modules back in, ensuring that the module marked “L” is on the left of the controller, and the module marked “R” is on the right of the controller. Both marks should be facing the outside of the controller.
Step 3: Push each module to secure them, you will feel them “click” into place.
Step 4: Put the faceplate back on the controller and push to secure. You will hear the magnets “click” into place.