How to: Connect SCUF Reflex to a device

  • Updated

Connect to Console (PS5)
Connect to PC (Windows 10+)
Connect to iOS (iPhone & iPad)
Connect to Android
Connect to Apple TV? 

 

Connect to Console (PS5)

For a wired or wireless connection, follow the steps below:

  1. Connect the USB-C end of your cable to your controller and the USB-end to any available USB port on your console.
  2. Press the Home button and your controller will be paired with the console, including wirelessly.

Connect to PC (Windows 10+)

Wired connection:

  1. Connect the USB-C end of your cable to your controller and the USB-end to any available USB port on your PC.
  2. Press the Home button and your controller will be paired with the PC.

For a wireless connection (Bluetooth), your PC will need to be equipped with Bluetooth connectivity, or you will need a compatible Bluetooth dongle connected to your PC. Then do the following:

  1. Start by going into “Settings” > “Bluetooth & other devices” and turning Bluetooth on.
  2. Select "Add Bluetooth or other device".
  3. Next select "Bluetooth" from the Add a device menu.
  4. Press the Home button to power on your Reflex.
  5. Next, hold down the Home Button and Create Button together on your Reflex controller until the light around the Touchpad flashes.
  6. Look at your “Add a device” list, and “Wireless Controller” will appear.
  7. Select it, and once it connects, the light around the Touchpad will turn solid.

Depending on the device, certain features on the controller might not be available. There is no guarantee that all devices are compatible with the controller. To check which PC devices/operating systems support the DualSense controller driver, please consult your device's manufacturer.

 

Connect to iOS (iPhone & iPad)

Compatibility:
iOS 14.5 or later
iPadOS 14.5 or later

 

To pair your controller:

  1. Make sure the player indicator on the controller is off. If the player indicator is on, press and hold the PS button until it turns off. If a USB is connected to the controller, disconnect it.
  2. While pressing and holding the create button, press and hold the Home Button until the light bar blinks.
  3. Enable Bluetooth on your device, and then select the controller from the list of Bluetooth devices.
  4. When pairing is complete, the light bar blinks, and then the player indicator lights up.

Note: Each time you change devices, you must pair the controller with the new device.

 

Depending on the device, certain features on the controller might not be available. There is no guarantee that all devices are compatible with the controller. To check which devices, support the DualSense controller driver, please consult your device's manufacturer.

Connect to Android

Compatibility:
Android 12 or later

  1. Go into the “Settings” of your Android smartphone.

  2. Select “Connected Devices”

  3. Click on “Pair New Device” to put your phone in pairing mode.

  4. Press the PS and Share buttons at the same time until the light bar begins to flash. The controller is now in pairing mode, which makes it discoverable by your Android device.

Connect to Apple TV

Compatibility:
tvOS 14.5 or later

To pair your controller:

  1. Turn the controller off.
  2. Press the PS and Share buttons at the same time until the light bar begins to flash. The controller is now in pairing mode, which makes it discoverable by your Apple device.
  3. Go into “Settings” > “Remotes and Devices” > “Bluetooth” to turn Bluetooth on. Keep this screen open to be able to see devices.
  4. Look at your “Other Devices” list, and “DualSense Wireless Controller” will appear.
  5. Select it, and once it connects, the light will turn solid.

Note: Each time you change devices, you must pair the controller with the new device.