Articles in this section

FAQ: Paddles on Valor Pro

Which functions can be remapped to the paddles?

How to: Remap the paddles

How to: Disable a paddle

How to: Remove inner paddles 

 

Which functions can be remapped to the paddles?

You can remap every function to the paddles except the Xbox home button and scroller wheel clicks. 
To remove a paddle’s input, simply map the share button to the paddle you don’t want to have a function. 

 

How to: Remap Your Paddle Profiles

  1. Press the profile button until you see the color profile you want to adjust.
  2. Press and hold the profile button again until the right indicator light starts blinking.
  3. Remap any paddle by pressing the paddle and the button you want it mapped to at the same
    time. The light will turn white and will then vibrate to confirm.
  4. To lock in your changes, press the profile button once more when the right indicator stops winking your new profile is saved

 

How to: Disable Paddles

  1. Hold the profile button until the light starts blinking.
  2. Press the paddle you want to disable and the share button at the same time. The light will blink to confirm.
  3. If you want to do more than one paddle, repeat the previous step.
  4. Press the profile button to lock it in.

 

How to: Remove Inner Paddles

  1. Locate the finger notch on the sides of the paddles using your finger.
  2. Pull away from the notch until the inner paddle comes off.
  3. Once the paddle is removed, take your blanking plate and line it up with the same spot where your paddle was.
  4. Press the blinking plate into place.

STILL NEED A HAND?

Let’s find the right solution.

Was this article helpful?
10 out of 33 found this helpful