Articles in this section

How to: Remap Paddles on SCUF Impact/Infinity4PS Pro

To remap the paddles, follow the instructions below:

  1. Turn on the game console and your SCUF controller
  2. Place the EMR Mag Key on the back of the controller (as indicated) so the magnet symbol latches onto the controller
  3. Press and hold the paddle that you wish to remap a function
  4. Press and hold the function (Χ, Ο, ∆, □, L DPAD, R DPAD, Left Thumbstick down, Right Thumbstick down) that you would like to map to a paddle
  5. Release the function
  6. Release the paddle
  7. Remove the EMR Mag Key and place it at least 5 cm away from the back of the controller to prevent the SCUF controller from accidentally entering remapping mode.

Please note:

  • The EMR feature MUST be selected on our online builder. This option cannot be added to the controller after it shipped. 
  • The EMR key itself will not suffice to remap the paddles. The EMR is an internal board that must be added to the controller during the production process. 
  • The following buttons can be mapped to the paddles: X, O, Square, Triangle, L3, R3, Left D-pad, Right D-pad.
  • Without the EMR, the paddle configuration will be (from left to right): X, Square, Triangle, O.

STILL NEED A HAND?

Let’s find the right solution.

Was this article helpful?
28 out of 105 found this helpful